中国老头和老妇TUBEPOM

  1. <track id="mzy0u"></track>

      Skip to main content
      Hitachi Construction Machinery - North America

      ZX250LC-6

      Construction Excavator

      Net Power
      132 kW
      177 hp
      Operating Weight
      25 463 kg
      56,136 lb.
      Max Dig Reach
      10.91 m
      35 ft. 10 in.
      Max Dig Depth
      7.61 m
      25 ft.
      ZX250LC-6

      More productivity with greater savings.

      Full of productivity-boosting advantages, the ZX250LC-6 delivers more efficiency, reliability, and durability. ?Front and center is a new, fuel-efficient EPA Final Tier 4 (FT4)/EU Stage IV Isuzu engine that meets rigid emission standards – no diesel particulate filter needed. Plus, you’ll get generous swing torque, dig force, and lift capacity. The spacious cab is designed for operator comfort and productivity, and standard upper-structure handrails provide added safety and accessibility.

      The ZX250LC-6 comes standard equipped with five years of ZXLink? Ultimate, giving you 24/7 online access to machine location, health, utilization, fuel consumption, and other valuable information – so you can better understand costs and jobsite performance.

      Features

      • The Isuzu EPA Final Tier 4 (FT4)/EU Stage IV engine delivers fuel-efficient and reliable performance. Fuel pressure, timing and volume are precisely regulated by electronic control for efficient combustion with Isuzu’s common-rail fuel injection system.
      • The pressurized fuel system improves fuel injector operation, and the fuel recirculation system helps prevent fuel gelling in cold climates – so you can maintain maximum productivity.
      • Auto-idle, which reduces engine speed when hydraulics aren’t in use, and auto-shutdown contribute to fuel efficiency.
      • ZX250LC-6_ZX300LC-6_MainframeThick-plate single-sheet mainframe, box-section track frames and industry-exclusive double-seal swing bearing deliver rock-solid durability.
      • With large idlers, rollers and strutted track links, the sealed and lubricated undercarriage is built for the long haul.
      • Reinforced D-channel side frames provide maximum cab and component impact protection.
      • Tungsten-carbide coated wear surfaces protect the critical bucket-to-arm joint.
      • Oil-impregnated bushings enhance durability and extend lube intervals to 500 hours for the arm-and-boom joint and 100 hours for the bucket joint.
      • Generous swing torque, digging force, and lift capacity help keep you on schedule.
      • Whatever your grade system, Topcon, Trimble or Leica, Hitachi offers a grade reference-ready package that reduces installation time by half.
      • ZX130-5_ZX160LC-5_ZX180LC-5_ZX210_lightsOptional cab and right-side boom lights provide extra illumination to extend your production.
      • ZX250LC-6_ZX300LC-6_visibilityGet unobstructed all-around visibility thanks to a new hood design paired with a wide expanse of front, side, and overhead glass and mirrors.
      • ZX350LC-6_ZX380LC-6_cabOperators get maximum support from a sculpted mechanical suspension high-back seat. Seat has 318 mm (12.5 in.) of travel, sliding together or independent of the joystick console. For even more comfort, opt for the air-suspension heated seat.
      • Automatic, high-velocity, bi-level climate-control system with automotive-style adjustable louvers helps keep the glass clear, the cab comfortable and the operator productive.
      • ZX250LC-6_ZX300LC-6_LCD_MonitorMulti-language LCD monitor and rotary dial provide intuitive access to machine info and functions. Just turn and tap to select work modes, monitor maintenance intervals, check diagnostic codes, and set cab temperature. Control oil flow and toggle between dig and thumb modes with a programmable thumb attachment mode.
      • ZX250LC-6_ZX300LC-6_LeverErgonomically correct short-throw pilot levers provide smooth, precise control with less effort. Pushbuttons in the right lever allow control of auxiliary hydraulic flow for attachments. Optional sliding switch provides proportional speed control, giving you full command from your fingertips.
      • It’s not always about brute force. Unmatched metering and smooth multifunction operation provide plenty of finesse and precision, too.
      • ZX250LC-6_ZX300LC-6_lubeCentralized lube banks place zerks within easy reach, making greasing less messy and time consuming.
      • ZX250LC-6_ZX300LC-6_filtersEngine oil, fuel, and hydraulic pilot oil filters are all located on the same side at ground level for easy servicing.
      • ZX250LC-6_ZX300LC-6_handrailUpper-structure handrails provide added safety when servicing the engine compartment, and a larger hood gives you better engine accessibility.
      • Our field-proven technology is simple and efficient, employing cooled exhaust gas recirculation (EGR), a diesel oxidation catalyst (DOC) and selective catalytic reduction (SCR). An improved piston design allows particulate matter to be burned in cylinder, so there’s no need for a diesel particulate filter (DPF).
      • A battery disconnect switch, located in the rear door behind the cab, is easily accessible and extends battery life.
      • The FT4 engine solution does not require a diesel particulate filter (DPF), saving service time and lowering operating costs.
      • The ZX250LC-6 is standard equipped with Hitachi’s ZXLink? system, giving you the power to optimize your operation and maximize your profits.?With the support of your dealer you can use your data to reduce idling time as well as maximize productivity and uptime. Without ever leaving your seat you’ll have access to fleet location, functions, hours, fuel consumption, alerts and other essential machine data. You can also view location and alert information in the field from your iOS or Android devices.

      Specifications

      Emission Rating
      Tier 4
      Number Of Cylinders
      4
      Displacement
      5.2 ltr
      317 Inches3
      Rated speed
      2000 rpm
      Engine Output - Net
      132 kW
      177 hp
      Number Of Carrier Rollers - Each Side
      2
      Number Of Track Rollers - Each Side
      9
      Track Shoe Width
      800 mm
      32 inches
      Transport Length Mono Boom
      10410 mm
      34 ft 2 in ft/in
      Transport Height - Maximum
      3370 mm
      11 ft 1 in ft/in
      Overall Undercarriage Width
      3390 mm
      11 ft 1 in ft/in
      Track Length On Ground
      3840 mm
      12 ft 7 in ft/in
      Overall Undercarriage Length
      4640 mm
      15 ft 3 in ft/in
      Tailswing Radius
      3140 mm
      10 ft 4 in ft/in
      Ground Clearance
      460 mm
      18 inches
      Width over fixed tracks
      3390 mm
      11 ft 1 in ft/in
      Track Gauge
      2590 mm
      8 ft 6 in ft/in
      Digging Reach - Mono Boom
      10910 mm
      35 ft 10 in ft/in
      Ground Level Reach - Mono Boom
      10750 mm
      35 ft 3 in ft/in
      Dig Height - Mono Boom
      10560 mm
      34 ft 8 in ft/in
      Dump Height - Mono Boom
      7580 mm
      24 ft 10 in ft/in
      Dig depth - 2.44m / 8'ft flat bottom
      7440 mm
      24 ft 5 in ft/in
      Dig Depth - Mono Boom
      7610 mm
      25 ft ft/in
      Fuel Tank
      510 ltr
      135 gallons (US)
      Hydraulic Tank
      156 ltr
      41 gallons (US)
      Ground Bearing Pressure
      37.6 kPa
      5.45 PSI
      Dipper Tearout
      114 kN
      25628 lbf
      Operating Weight
      25463 kg
      56136 lbs

      Compare

      Select models to compare to the Hitachi ZX250LC-6
      (Maximum of 3)
      Hitachi Models
      Competitor Models
      Customize your solution.
      中国老头和老妇TUBEPOM

      1. <track id="mzy0u"></track>